Kawasaki Z1B – 1973 Restored Motorcycle

Manufacturer: Kawasaki      Year:

Kawasaki Z1B – 1973

Year: 1973
Manufacturer: Kawasaki
Model: Z1A
Colour: Brown
Engine Size: 903
Drive Type: Chain
Start Type: Combo


Restored 1973 Kawasaki Z1A Motorcycle.

This Kawasaki was fully restored by its owner.

The frame was powder coated along with every other piece that was black including the battery box, foot pegs, triple trees and kick stand.

New tapered steering head bearings were used to upgrade the original ball bearings.

The swing arm bushings were upgraded to needle bearings.

The motor had a complete rebuild.

The cylinder head was fitted with new exhaust guides, springs and viton seals.

All new gaskets and seals were used.

All of the internal engine parts were inspected and replaced as needed.

The transmission was checked for wear.

The cables were replaced.

A new seat was fitted.

The indicator lenses were replaced.

New grips were fitted.

Most of the chrome was re-plated including both fenders.

The engine covers and fork legs were polished.

The forks were rebuilt with new seals and fresh oil.

The gauges were rebuilt and reset.

A brand new exhaust system was fitted.

The brake caliper was rebuilt with new seals.

A great restored Kawasaki Z1B Motorcycle.

Parts and Spares for this Motorcycle delivered Worldwide >>>

Download the Official Workshop Manual for this Motorcycle>>>


Yamaha RT2 360 Enduro – 1972 Restored Motorcycle

Manufacturer: Yamaha      Year:

Yamaha RT2 360 Enduro – 1972

Year: 1972
Manufacturer: Yamaha
Model: RT2 360 Enduro
Colour: Silver
Engine Size: 360
Drive Type: Chain
Start Type: Kick Start


Restored 1972 Yamaha RT2 360 Enduro Motorcycle.

This Yamaha was professionally restored to the original specification..

The carburettor was cleaned and rebuilt.

The fenders, chain guard and the tail light bracket were painted the correct Yamaha silver.

The oil tank, fuel tank, headlamp ears and the headlamp bucket were soda blasted and repainted with the correct shade of grey silver.

All of the paint was clear coated 3 times.

The frame was sandblasted and powder coated.

The tool box, seat pan, air box, stand and skid plate were sandblasted and painted Yamaha black and then clear coated for protection.

The front forks were rebuilt.

The piston and rings were replaced.

The transmission was inspected.

All of the crankshaft and transmission bearings were replaced.

All of the nuts and bolts including the spokes were zinc plated.

The wheel hubs, engine covers, lower forks, turn signal switch, throttle housing and both levers were polished.

All of the cables were replaced.

The seat foam and the seat cover were replaced with high quality after market items.

Brand new handlebars were fitted.

Both wheels, the fuel tank cap, head light ring and turn signals were re-chromed.

The speedometer and tachometer were rebuilt.

All of the external engine seals were replaced.

A stunning restored Yamaha 360 Enduro Motorcycle.

Benelli 125 Cobra – 1966 Restored Motorcycle

Manufacturer: Benelli      Year:

Benelli 125 Cobra – 1966

Year: 1966
Manufacturer: Benelli
Model: Cobra
Colour: Red
Engine Size: 125
Drive Type: Chain
Start Type: Kick Start


Restored 1966 Benelli 125 Cobra Motorcycle.

This Benelli was restored from the frame up by its owner.

The bike was sand blasted down to bare metal.

The paintwork was professional refinished.

The new wheel rims were re-laced with new spokes.

New tyres and tubes were fitted.

A new old stock speedometer was fitted.

The exhaust system was replaced with a new old stock item..

The engine was taken apart for inspection.

The seat was professionally reupholstered

All new control cables were used.

New rear shock absorbers were fitted.

The foot peg rubbers were replaced.

A lovely restored Benelli 125 Cobra Motorcycle.

Honda XL500S – 1981 Restored Motorcycle

Manufacturer: Honda      Year:

Honda XL500S – 1981

Year: 1981
Manufacturer: Honda
Model: XL500S
Colour: Ref
Engine Size: 500
Drive Type: Chain
Start Type: Kick Start


Restored 1981 Honda XL500 Motorcycle.

This Honda was imported from the USA and restored by its owner in the UK.

The frame and swing arm were stripped and powder coated.

The forks were rebuilt.

The bodywork and the fuel tank were painted to a very high standard.

The seat was professionally re-covered.

The engine was stripped.

New piston rings and gaskets were used in the rebuild.

The carburettor was ultrasonically cleaned and rebuilt with a new jet kit.

A new old stock rear light was fitted.

Pattern indicators were sourced and fitted.

A lovely restored Honda XL500 Motorcycle.

Suzuki GT750B – 1977 Restored Motorcycle

Manufacturer: Suzuki      Year:

Suzuki GT750B – 1977

Year: 1977
Manufacturer: Suzuki
Model: GT750B
Colour: Blue
Engine Size: 750
Drive Type: Chain
Start Type: Combo


Restored 1977 Suzuki GT750B Motorcycle.

This stunning Suzuki was restored over a 12 month period by its owner.

The fuel tank was professionally painted in the correct blue.

The carburettors were stripped, cleaned and professionally rebuilt.

The original Takasago wheel rims were re-chromed and laced with polished stainless steel spokes.

The clocks were reconditioned with new glass and set to zero.

The grips and footrest rubbers were replaced.

A new points cover was fitted.

The carburettor rubbers were replaced.

The frame was powder coated gloss black.

The original seat base was re-covered and fitted with new trim.

An outstanding restored GT750B Motorcycle.