Kawasaki Z1R – 1978 Restored Motorcycle

Manufacturer: Kawasaki      Year:

Kawasaki Z1R – 1978

Year: 1978
Manufacturer: Kawasaki
Model: Z1R
Colour: Silver Stardust
Engine Size: 1,000
Drive Type: Chain
Start Type: Combo


Restored 1978 Kawasaki Z1R Motorcycle.

This motorcycle has been the subject of a full and comprehensive restoration.

It was restored as close as humanly possible to stock specification using the original parts and new old stock parts.

The engine was rebuilt.

The outer cases were polished and the engine was painted black to match the original.

Every nut and bolt was re-plated or replaced.

The paintwork was professionally refinished.

All of the chrome was re-plated.

All rubber parts were replaced.

The wheels were stripped, re-painted and polished.

All of the electrical items were overhauled or replaced.

A new seat was fitted.

An outstanding restored Kawasaki Z1R Motorcycle.

Parts and Spares for this Motorcycle delivered Worldwide >>>

Download the Official Workshop Manual for this Motorcycle>>>


Kawasaki H2 – 1972 Restored Motorcycle

Manufacturer: Kawasaki      Year:

Kawasaki H2 – 1972

Year: 1972
Manufacturer: Kawasaki
Model: H2
Colour: Blue
Engine Size: 750
Drive Type: Chain
Start Type: Kick Start


Restored 1972 Kawasaki H2 Motorcycle.

This Kawasaki was restored by its owner.

The engine was rebuilt with new piston rings.

New small end bearings were fitted.

The bottom end was left alone as it was in perfect condition.

The engine was professionally cleaned.

The frame was painted in two pack and new bearings were fitted.

All of the paintwork was painted professionally in the correct Kawasaki colour with RB decals.

The seat foam and cover were replaced.

The wheels were re-laced with new spokes and nipples.

The fork stanchions were re-chromed and rebuilt with new oil and seals.

A new chain and sprockets was fitted.

The original bolts were zinc plated.

A really great restored Kawasaki H2 Motorcycle.

BMW R60/2 – 1965 Restored Motorcycle

Manufacturer: BMW      Year:

BMW R60/2 – 1965

Year: 1965
Manufacturer: BMW
Model: R60/2
Colour: Black
Engine Size: 600
Drive Type: Shaft
Start Type: Kick Start


Restored 1965 BMW R60/2 Motorcycle.

This BMW was professionally restored from the frame up.

The carburettors were comprehensively restored.

A brand new exhaust system was fitted.

The bike was converted to 12volt electrics with a larger alternator and electronic ignition upgrade.

The original Weinmann wheel rims were restored and rebuilt with new spokes and nipples.

The frame and cycle parts were fully restored with wax coating applied internally for corrosion protection.

The petrol tank and guards were restored with all pin striping carried out by hand.

The petrol tank was sealed with the original BMW type red tank sealant.

New old stock tank badges were fitted.

The speedometer was restored and zeroed.

All of the rubbers including the handlebar grips, foot pegs, pillion pegs, gear change rubber, knee pads, headlight ear rubbers and cable rubbers were replaced.

The shocks were restored.

Reinforced clutch springs were used.

A new heavy duty wiring harness was fitted.

New old stock Hella bar end turn signals were fitted.

The cylinder heads were rebuilt to ‘as new’ condition with new inlet guides, exhaust guides, inlet valves, exhaust valves and hardened seats.

The barrels were restored and re-bored.

New old stock pistons were fitted.

The oil pump was restored.

The camshafts were restored.

The front timing gear set was replaced with new old stock items.

The crankcases were aluminium blasted for a period finish.

All of the engine bearings were replaced with genuine brass caged riveted bearings.

The crankshaft was fully rebuilt with new bearings and balanced.

The gearbox was fully restored throughout, all shafts, selectors and gears were replaced where necessary.

All of the cables were replaced.

An excellent restored BMW R60/2 Motorcycle.

BSA Gold Star – 1956 Restored Motorcycle

Manufacturer: BSA      Year:

BSA Gold Star – 1956

Year: 1956
Manufacturer: BSA
Model: Gold Star
Colour: Silver
Engine Size: 350
Drive Type: Chain
Start Type: Combo


Restored 1956 BSA Gold Star Motorcycle.

This lovely Gold Star was restored by its owner.

The engine was rebuilt with a new crank shaft assembly.

Forged pistons were installed.

The valves and rocker boxes were replaced.

A small fin barrel was fitted.

New timing covers were fitted.

A new concentric carburettor was used.

A Pearson clutch was fitted.

The front brakes were replaced.

The electrics were upgraded to 12 volt.

The Akron wheel rims were restored with new spokes.

A new exhaust system was sourced and fitted.

The frame was refurbished.

A lovely restored BSA Gold Star Motorcycle.

Triumph Trophy – 1967 Restored Motorcycle

Manufacturer: Triumph      Year:

Triumph Trophy – 1967

Year: 1967
Manufacturer: Triumph
Model: Trophy
Colour: Green/White
Engine Size: 650
Drive Type: Chain
Start Type: Kick Start


Restored 1967 Triumph Trophy 650 Motorcycle.

This motorcycle was fully restored by its owner.

The engine was rebuilt with new main bearings, rod bearings, pistons, rings, valves and valve guides.

The transmission bearings were replaced along with the seals.

The engine cases were properly bead blasted to retain a like new appearance.

All of the frame parts, metal brackets and the fork lowers were stripped and correctly painted in gloss black.

All of the aluminium parts were polished.

The fenders were also polished.

The Dunlop wheel rims were chromed and rebuilt with stainless steel spokes.

All of the nuts and bolts were cad plated.

The gas tank was stripped and the inside relined.

The tank was professionally painted in mist green and alaskan white with a gold pin strip.

A lovely restored 1967 Triumph Trophy Motorcycle.