BMW R69 – 1960
Engine Size: 600
Drive Type: Shaft
Start Type: Kick Start
Restored 1960 BMW R69 Motorcycle.
The engine was completely disassembled and inspected, the engine case was soaked in degreaser and pressure cleaned.
The cylinders were honed and new rings were installed.
The crankshaft was completely rebuilt with new bearings, new crank pins and new connecting rods.
New intake and exhaust valves and valve guide stems were installed and a professional three angle valve job was machined to improve performance, flow and efficiency.
The engine was carefully and meticulously assembled to all BMW Factory Manual specifications.
The cylinders were powder coated to a high gloss black for maximum finish durability.
The engine block was completely assembled and then the proper run out of the flywheel was checked for the exact factory tolerances before the engine block was installed into the frame.
New polished stainless steel pushrod tubes and seals were installed.
Brand new correct valve covers were installed.
A brand new main wiring harness was installed along with new wiring for the headlight, new wiring to the tail light and new wiring for the headlight switch.
All of the electrical components were replaced with OEM parts.
With the exception of the tank, fenders, headlight and tail light the entire bike was powder coated high gloss.
The tank and fenders were stripped down to bare metal.
All of the parts were primed with a high grade primer and professionally re-sprayed.
The tank and fenders were correctly hand striped.
A truly outstanding restored BMW R69 Motorcycle.